-
source code of nanoMOS 4.0 and SPINFET simulations
Q&A|Closed | Responses: 1
1) From where can I download the source code of the latest version of nanoMOS ? It seems ,on this website version 2.5 can only be downloaded .
2) where do I find the outputs of SPINFET...
https://nanohub.org/answers/question/1398
-
What is the sequence of required effective masses as input?
Q&A|Closed | Responses: 0
If I choose “Other III-V materials” in material section, there are five effective masses separated by colon for each direction. What is the sequence of them? According to valleys, is...
https://nanohub.org/answers/question/1343
-
Problems with HEMT
Q&A|Closed | Responses: 0
Hi
I want to simulate the HEMT device structure. Even after applying all necessary device parameters and boundary conditions, the simulator does not converge(shows a matrix assignment problem)...
https://nanohub.org/answers/question/1291
-
eps_c and eps_si definition
Q&A|Closed | Responses: 0
I am trying to simulate a double-gate MOSFET with a new material. However, I am not clear about the what eps_c and eps_si are respectively. From my understanding, eps_si is the dielectric...
https://nanohub.org/answers/question/1194
-
Is version 4.0 source code available?
Q&A|Closed | Responses: 0
I was wondering if the version 4.0 source code is available for download?
https://nanohub.org/answers/question/1126
-
Can nanoMOS simulate a tunneling transistor?
Q&A|Open | Responses: 2
I’m wondering if nanoMOS can simulate a tunneling transistor. It’s a gated p-i-n diode.
https://nanohub.org/answers/question/1056
-
Problem launching job: 0child process exited abnormally
Q&A|Closed | Responses: 0
Hi,
Even though I was using the default settings, NanoMOS with TRANSPORT MODEL “NEGF with phonon...
https://nanohub.org/answers/question/1004
-
for the same case, the simulation results by the newest version are not the same as those simulated by the previous versions, any parameter changed?
Q&A|Closed | Responses: 0
https://nanohub.org/answers/question/965
-
Using nanomos
Q&A|Closed | Responses: 1
Hi
I am beginner and i was trying to use nanoMOS for first time in MATLAB. I downloaded latest nanoMOS but i coudnt find out how to run it as there was no nanomos.m file in it as mentioned in...
https://nanohub.org/answers/question/921
-
Error regarding path
Q&A|Open | Responses: 1
Hi
I get the following error when I try to run Nanomos.
{b??? Error using ==> load
Unable to read...
https://nanohub.org/answers/question/848
-
How the Fermi level (EF) is determined for charge and current calculation?
Q&A|Closed | Responses: 0
https://nanohub.org/answers/question/721
-
questions about 2d electron density along the channel
Q&A|Closed | Responses: 0
As far as I understand, for NEGF model, the 2d electron density is first computed though integral of (Fermi function)*spectral density over energy, then the 3d electron density is obtained by...
https://nanohub.org/answers/question/710
-
nanoMOS always reports error
Q&A|Closed | Responses: 2
I am sure I followed the instructions strictly as followed:
‘The Matlab version
=====================
nanoMOS is written in Matlab a scripting language (https://nanohub.org/answers/question/443
-
Can it simulate quasi ballistic transport
Q&A|Closed | Responses: 1
Can NanoMOS3.5.4 simulate quasi ballistic transport? Is there any tool to simulate quasi ballistic transport...
https://nanohub.org/answers/question/412
-
system requirement?
Q&A|Closed | Responses: 1
I have downloaded the latest version nanomos-354 (btw, there are only m-files in the src directory, but no sub-directories like /matlab, /python,/octave…)
and tried to run it in my PC...
https://nanohub.org/answers/question/391
-
About voltage stepping
Q&A|Closed | Responses: 0
Hello,
First of all, thanks a lot for this amazing tool, but I am wondering why I can not get proper voltage shift for drain voltage-current graph. I gave drain voltage step as 0.1, gate...
https://nanohub.org/answers/question/388
-
Models
Q&A|Closed | Responses: 0
How can I run for examples 3a and 3b a simulation using Classical Ballistic Model? And a Energy Balance Model?
In the window appearing I can choose the Drift-Diffusion Model and two other...
https://nanohub.org/answers/question/368
-
NanoMOS 3.5 (online Verison)
Q&A|Open | Responses: 1
When I used NanoMOS 3.5 on nanoHub, I got the same answers when I set Ambient Temperature at 200 & 300 K...
https://nanohub.org/answers/question/326
-
What is the double mosfte width(W) in nanoMos simulation?
Q&A|Open | Responses: 2
How much is the width(W) of double gate mosfet in nanoMos simulatin and how can I change it?
Best regards
https://nanohub.org/answers/question/207
-
double gate mosfet width (W) in nanoMos
Q&A|Open | Responses: 2
https://nanohub.org/answers/question/206