Padre

By Mark R. Pinto1; kent smith; Muhammad Alam2; Steven Clark2; Xufeng Wang2; Gerhard Klimeck2; Dragica Vasileska3

1. Applied Materials, Inc. 2. Purdue University 3. Arizona State University

2D/3D devices under steady state, transient conditions or AC small-signal analysis

Launch Tool

You must login before you can run this tool.

Version 1.5 - published on 04 Aug 2014

doi:10.4231/D30C4SK7Z cite this

This tool is closed source.

View All Supporting Documents

Recent Questions

Ask a question

Recent Questions (1-20 of 48)
2419 Why the name is PADRE?
Asked by Anonymous @ on • Open • 0
2347 How do I allow for an increased problem size?
Asked by Anonymous @ on • Closed • 1 		0 Like
2275 Can Ldmos be designed in padre
Asked by Anonymous @ on • Open • 0 		0 Like
2142 Intrinsic carrier concentration in PADRE appears incorrect
Asked by Robert Zedric @ on • Open • 0 		0 Like
1868 Should I multiply the values of n-QFL or p-QFL with -1 or padre gives me right values?
Asked by Hassan Imran @ on • Open • 0 		0 Like
1855 Can't plot mesh
Asked by Anonymous @ on • Open • 0 		0 Like
1843 physical model manual
Asked by Gino Giusi @ on • Open • 0 		0 Like
1774 What means: Error 1612132 detected in BLSMP
Asked by Anonymous @ on • Open • 0
1773 Plotting x- and y-component of electric field creates an error
Asked by Anonymous @ on • Open • 0 		0 Like
1659 How can I print Matarial (for ex. silicon) parameters using PRINT line?
Asked by Mateusz @ on • Open • 0 		0 Like
1532 How to give generation AM1.5g in PADRE?
Asked by Anonymous @ on • Open • 0 		Points 0 Like
1518 How to turn on or activate Radiative Recombination in PADRE? Which parameters should be specified to activate Radiative Recombination?
Asked by Hassan Imran @ on • Open • 1 		0 Like
1307 how can i simulate voltage with time in single moscap
Asked by Anonymous @ on • Open • 1 		0 Like
1211 interface
Asked by Jing-Shuen Hong @ on • Open • 0 		0 Like
1165 Fermi statistics produces too low current
Asked by SungGeun Kim @ on • Open • 0 		0 Like
1133 how to Plot the I-V characteristic using a semi-log scale
Asked by mohamed mahmoud kamel @ on • Open • 0 		0 Like
1124 how to plot two graphs on the same plot? like Ec and Ev on the same plot ?
Asked by Alaa Salah @ on • Open • 0 		0 Like
1083 3D simulation in Padre
Asked by Chi-Sun Hwang @ on • Closed • 1 		0 Like
1010 How do I draw a band diagram with the conduction band, valence band and the Quasi Fermi levels in the same plot
Asked by Anonymous @ on • Open • 1 		0 Like
932 doping profile description?
Asked by Fayez Abdel Qader Elsisy @ on • Open • 1