-
Experience Microfabricating Biosensors - A Summer Research Opportunity
Online Presentations | 08 Jan 2024 | Contributor(s):: Adarsh Radadia, The Micro Nano Technology - Education Center
-
3D Printed Electronics: A Primer
Online Presentations | 10 May 2023 | Contributor(s):: Frank Silva, The Micro Nano Technology - Education Center
-
Machine Learning Predicts Additive Manufacturing Part Quality: Tutorial on Support Vector Regression
Online Presentations | 26 Aug 2022 | Contributor(s):: Davis McGregor
This tutorial introduces and demonstrates the use of machine learning (ML) to address this need. Using data collected from an AM factory, you will train a support vector regression (SVR) model to predict the dimensions of AM parts based on the design geometry and manufacturing parameters.
-
Experience Microfabricating Biosensors: A Summer Research Opportunity
Online Presentations | 17 Jun 2022 | Contributor(s):: Adarsh Radadia, The Micro Nano Technology - Education Center
-
X-Ray Micro-Computed Tomography Characterization of the Internal Microstructure of 3D Printed Hardened Cement-based Materials
Online Presentations | 09 Aug 2019 | Contributor(s):: Mohamadreza Moini
In our research a lab-based X-ray microscope was used to perform micro-CT evaluations to explore the microstructural characteristics of 3-day old intact (i.e. not tested) 3D printed and cast hardened cement paste specimens at two levels of magnification: 0.4X and 4X. ...
-
Research in Xu’s Group
Online Presentations | 07 Aug 2019 | Contributor(s):: Xianfan Xu
-
Building Molecules for Function: New Materials & Inks Will Be Needed If Additive Manufacturing Will Change Medicine
Online Presentations | 27 Feb 2019 | Contributor(s):: Matthew L. Becker
This presentation will describe the use of several translationally relevant chemistries and post-printing functionalization strategies that are impacting the practice of medicine and how physicians are planning for future therapies that were not possible previously.
-
CELL-MET Thrust Area 2 - Nanomechanics: Scaffold Generation Using 3D Jet Writing
Online Presentations | 07 Feb 2019 | Contributor(s):: Ayse Muniz, CELL-MET ERC
In this presentation, UMich graduate student Ayșe Muñiz explains her work on Nanomechanics in Joerg Lahann's lab.
-
Tutorial on Two Photon Lithography Tool
Online Presentations | 26 Nov 2018 | Contributor(s):: Mohammad Mahfuzul Kabir, Varun Ajit Kelkar
Two-photon lithography (TPL) is a nano-scale 3-d fabrication technique. TPL depends upon the two-photon polymerization process, whereby two incident photons of light are absorbed by a precursor material leading to polymerization. The smallest feature size (voxel) achievable in a TPL...