-
Experience Microfabricating Biosensors - A Summer Research Opportunity
Online Presentations | 08 Jan 2024 | Contributor(s):: Adarsh Radadia, The Micro Nano Technology - Education Center
-
Technology related articles
Wiki
Only 3D printing can get the Navy’s submarine plan back on track, admiral...
https://nanohub.org/projects/scalek12curricu/notes/TechnologyrelatedarticleDOD
-
3D Printed Electronics: A Primer
Online Presentations | 10 May 2023 | Contributor(s):: Frank Silva, The Micro Nano Technology - Education Center
-
Machine Learning Predicts Additive Manufacturing Part Quality: Tutorial on Support Vector Regression
Online Presentations | 26 Aug 2022 | Contributor(s):: Davis McGregor
This tutorial introduces and demonstrates the use of machine learning (ML) to address this need. Using data collected from an AM factory, you will train a support vector regression (SVR) model to predict the dimensions of AM parts based on the design geometry and manufacturing parameters.
-
Terahertz Materials for 3D Printing
Animations | 21 Aug 2022 | Contributor(s):: Ariel Delos Reyes, Rice University
Terahertz (THz) represent the portion of the electromagnetic radiation between the microwave and the infrared region. Potential applications range from communication, pharmaceutical, medical and dental. However, the fabrication of photonic devices are challenging due to the limited choices...
-
Experience Microfabricating Biosensors: A Summer Research Opportunity
Online Presentations | 17 Jun 2022 | Contributor(s):: Adarsh Radadia, The Micro Nano Technology - Education Center
-
Feb 17 2021
Engineering Personalized Tissue Implants: From 3D Printing to Bionic Organs
In this webinar, you will learn about cutting-edge bio and nanotechnologies for engineering functional tissues and organs, focusing on the design of new biomaterials mimicking the natural...
https://nanohub.org/events/details/1954
-
Modeling and visualization of geometric errors for hemisphere structures produced by two-photon lithography
Tools | 15 Jan 2021 | Contributor(s):: Sixian Jia, Yuhang Yang, Varun Ajit Kelkar, Hemangg Singh Rajput, Adriana Carola Salazar Coariti, Kimani C Toussaint, Chenhui Shao
3D geometric measurements of fabricated structures/features
-
X-Ray Micro-Computed Tomography Characterization of the Internal Microstructure of 3D Printed Hardened Cement-based Materials
Online Presentations | 09 Aug 2019 | Contributor(s):: Mohamadreza Moini
In our research a lab-based X-ray microscope was used to perform micro-CT evaluations to explore the microstructural characteristics of 3-day old intact (i.e. not tested) 3D printed and cast hardened cement paste specimens at two levels of magnification: 0.4X and 4X. ...
-
Research in Xu’s Group
Online Presentations | 07 Aug 2019 | Contributor(s):: Xianfan Xu
-
Building Molecules for Function: New Materials & Inks Will Be Needed If Additive Manufacturing Will Change Medicine
Online Presentations | 27 Feb 2019 | Contributor(s):: Matthew L. Becker
This presentation will describe the use of several translationally relevant chemistries and post-printing functionalization strategies that are impacting the practice of medicine and how physicians are planning for future therapies that were not possible previously.
-
Composite Filament Simulation 3D
Tools | 15 Feb 2019 | Contributor(s):: Zachary Yun, Michelle Zhang, Ganesh Vurimi, Hayden Taylor, Sixian Jia
Simulate electrical properties of a nanowire composite filament.
-
CELL-MET Thrust Area 2 - Nanomechanics: Scaffold Generation Using 3D Jet Writing
Online Presentations | 07 Feb 2019 | Contributor(s):: Ayse Muniz, CELL-MET ERC
In this presentation, UMich graduate student Ayșe Muñiz explains her work on Nanomechanics in Joerg Lahann's lab.
-
Oyedamola Andrew Asiyanbola
https://nanohub.org/members/216065
-
Tutorial on Two Photon Lithography Tool
Online Presentations | 26 Nov 2018 | Contributor(s):: Mohammad Mahfuzul Kabir, Varun Ajit Kelkar
Two-photon lithography (TPL) is a nano-scale 3-d fabrication technique. TPL depends upon the two-photon polymerization process, whereby two incident photons of light are absorbed by a precursor material leading to polymerization. The smallest feature size (voxel) achievable in a TPL...
-
Two Photon Lithography
Tools | 06 Jul 2018 | Contributor(s):: Mohammad Mahfuzul Kabir, Varun Ajit Kelkar, Darren K Adams, Kimani C Toussaint
Calculate voxel dimensions for a two-photon lithography process
-
Nanotechnology Principles Lab: Lithography
Teaching Materials | 07 Dec 2015 | Contributor(s):: SHINE Project, SHINE Project
This lab consists of activities designed to teach students about lithography. The entire bundle can be downloaded by clicking on the download link in the upper right or compontents can be individually downloaded by visiting the Supporting Docs tab. Learning Objectives: To understand how...
-
Santosh Kumar
https://nanohub.org/members/121928
-
Keng Hsu
Prof. Hsu grew up in the machine shops and has been in the fields of Manufacturing, Mechanical Engineering, and Materials Science for the past 20 years. After working in the industry as a...
https://nanohub.org/members/42683
-
3D Nanolithography
Groups
https://nanohub.org/groups/3dnanolitho