-
How to write Dielectric Options File
Q&A|Closed | Responses: 3
Hello.
I am using nanoDDSCAT+ and would like to make the custom dielectric file for a material. How do I format this?
https://nanohub.org/answers/question/2488
-
dimensions to the shape nanoddscat plus
Q&A|Closed | Responses: 1
I am trying to simulate plasmonic properties of bipyramidal shape gold particles of length 500 nm and width 200 nm
can you please tell me After drawing a custom shape in blender, how can...
https://nanohub.org/answers/question/2102
-
how to do calculation of electric field of plasminic nanoparticles with different frequencies
Q&A|Closed | Responses: 1
Using nanoDDSCAT+ we can see the electric field enhancement of plasmonic nanoparticles at their extinction maxima, can we see the electric field of the same nanoparticle under the irradiation of...
https://nanohub.org/answers/question/2052
-
xyz coordinates for dipoles from DDSCAT output
Q&A|Closed | Responses: 0
Is it possible to extract the xyz coordinates for the dipoles from a DDSCAT simulation?
Or alternatively have an xyz file as input for a DDSCAT simulation?
https://nanohub.org/answers/question/1836
-
How do I get the precise size of my shape & coating?
Q&A|Closed | Responses: 0
Hello,
I am trying to create a triangular prism with a 3 nm coating by placing one triangular prism within another in Blender and converting this shape in nanoDDSCAT+. However,...
https://nanohub.org/answers/question/1830
-
Uploading dielectric constants into nanoDDSCAT?
Q&A|Open | Responses: 1
I have complex dielectric constants for aluminum at given frequencies and was hoping to upload this into nanoDDSCAT, but unsure of the proper format or values to put into the...
https://nanohub.org/answers/question/1819
-
Dielectric for materials
Q&A|Closed | Responses: 2
Dear,
I would like to know the source of dielectric functions for gold, silver and titanium dioxide in this simulation tool. thanks
reagrds
Shahid
https://nanohub.org/answers/question/1817
-
dont display E-field data
Q&A|Closed | Responses: 1
Hi,
I cannot see E-field data. Simulation finished successfully but dont display E-field data
please help me out
regards
Shahid
https://nanohub.org/answers/question/1816
-
could’nt compute E-Field
Q&A|Closed | Responses: 2
Dear AbderRehman,
I couldnt obtain E-field since last software update. I tried to re-run an old simulation but this time extinction efficiency factor results are different (lower) from...
https://nanohub.org/answers/question/1759
-
how to add reflectors or multiple light sources in ddscat simulation
Q&A|Closed | Responses: 1
Dear,
I would like to setup a system with light reflectors to illuminate the system from all directions. i was thinking to add more light sources to act as reflectors. I am...
https://nanohub.org/answers/question/1755
-
simulation failed, error
Q&A|Closed | Responses: 1
Dear,
I received following error
<<< DDSCAT has encountered an error in processing. >>>
Resultant data displayed for...
https://nanohub.org/answers/question/1754
-
Forrtl:Severe (41) insufficient virtual memory (error)
Q&A|Closed | Responses: 1
Dear,
I received this error message. for more detail
https://www.dropbox.com/s/7rwi4p57gov335p/insuficient%20memory.jpg?dl=0
I have sufficient disk...
https://nanohub.org/answers/question/1750
-
at different cylinder rotations number of dipoles are different why?
Q&A|Closed | Responses: 1
Dear,
I am simulating a cylinder with diameter 7.5 nm and length 25 nm, with resolution level of 3 i got number of dipoles around 29k when rod is aligned along z-axis in blender. BUT...
https://nanohub.org/answers/question/1738
-
data from failed/aborted simulation
Q&A|Closed | Responses: 3
Dear,
I am interesting to know how to obtain data from a simulation either aborted or failed? i ran one simulation which stopped after 10 days and as following image showing 89/100...
https://nanohub.org/answers/question/1736
-
is it possible to obtain data from aborted simulation session
Q&A|Closed | Responses: 1
Dear,
i am interesting to know if it possible to obtain data (e.g. qtable) from aborted simulation session? I shall be thankful to you
kind regards
Shahid
https://nanohub.org/answers/question/1735
-
step “Process”
Q&A|Closed | Responses: 1
Dear,
I have relatively large simulation but not that large. cylindrical object with diameter 35 nm and length 150 nm and number of dipoles =1145700. I am using "remote parallel...
https://nanohub.org/answers/question/1732
-
object periodicity
Q&A|Closed | Responses: 1
Dear admin,
Object periodicity option is disabled. why?
regards
Shahid
https://nanohub.org/answers/question/1724
-
paramsters to excite Longitudinal Plasmon of a cylinders
Q&A|Closed | Responses: 2
Dear,
I am using custom shape (cylinder) with diameter 7.5 nm and 25 nm length. i am interesting to excite longitudinal plasmons but unfortunately i am not success, i have changed the...
https://nanohub.org/answers/question/1723
-
how to excite transverse and longitudinal mode for a nanorod in a single simulation?
Q&A|Closed | Responses: 1
Dear,
Two basic question
1. how to excite transverse and longitudinal mode for a nanorod in a single simulation?
2. what will happen if I will select the...
https://nanohub.org/answers/question/1722
-
some wavelengths are missing the spectrum
Q&A|Closed | Responses: 1
Dear,
I used the option "Remote parallel DDSCAT with wavelength splitting" for 4000 minutes (2.7 days) over the weekend and got the results back after almost 1.5 days. i am...
https://nanohub.org/answers/question/1721